Sponsored By: The Anderson’s Plant Nutrient
With the growing season nearing harvest, it is time to think about fall fertilizer applications, particularly for pH and liming needs. The first step is to take a thorough soil test to measure values of major nutrients (NPK), cations (calcium, magnesium, potassium, hydrogen, and sodium), and micronutrients. Depending on the soil test results, fall is an ideal time for the application of lime or gypsum as these mined sources break down in the soil over the winter to become readily available to the growing crop the following season.
SOIL PH, LIME, AND GYPSUM 101
Soil pH is the measure of the concentration of hydrogen ions in the soil. The soil pH affects the crop from planting to harvest because it determines the availability of nutrients through chemistry and microbial processes.
Figure 1 shows how pH can influence nutrient uptake versus tie-up. Maintaining a soil pH between 5.8 and 6.8 is ideal, where nutrients are most available. It is best practice to continually maintain soil pH, rather than wait for an imbalance to occur.
Lime delivers calcium and/or magnesium to the soil and raises pH. Nitrogen fertilizers acidify soil (lower pH), and if pH is low, lime will need to be applied. The issue with many ag limestone products is that they take time (usually two years) to significantly raise a pH deficiency into an optimal range.
Adjustment of soil pH in-season is possible when using a pelletized limestone product. If soils are limed regularly, this will counteract the acidifying effect of nitrogen applications, and pH should never get too low.
Gypsum contains calcium and sulfur and is pH neutral. Gypsum also offers many benefits for improving soil structure in tight, compacted, or high-clay soils. The sulfur in gypsum attaches to magnesium cations that strongly bind soil particles closely together. The sulfur then flushes magnesium through the soil profile, helping to loosen soil. Over time, soil pore space is increased, allowing for greater water and air infiltration within the soil profile.
WHAT’S THE GYPSUM BUZZ?
Gypsum is a hot topic in agriculture these days. It is important to understand the differences between lime and gypsum, and even though gypsum is pricier than lime, gypsum should be applied at times when it is more appropriate. Unlike lime, gypsum provides needed sulfur to the soil. As a result of the Clean Air Act in 1963, crops do not receive sulfur in the form of acid rain because the rain is no longer acidic. Sulfur is an anion that is leachable in the soil profile, so it is up to growers to monitor sulfur levels and supplement as needed.
BENEFITS OF HUMIC ACID
The original source of humic substances comes from organic matter. Humic acid’s main benefit is to provide carbon to the cropping system. Just like nitrogen, phosphorus, and potassium, carbon can be a limiting nutrient and should be effectively managed. Carbon is the foundation for all soil physical, chemical, and biological processes on Earth. Carbon can increase soil’s water-holding capacity, improving both soil structure and porosity for optimal water drainage and aeration.
The Andersons Pelletize Products
The Andersons pelletized lime and gypsum products are a marriage of important attributes. You get high-quality, mined calcium and either magnesium or sulfur, depending on the product, in a granule form that is user-friendly and spreads easily.
It is important to be thinking ahead to the next growing season now. Planning will put you in the most prepared position when it comes to the application of soil amendments to your fields. NutraSoft OP, NutraLime OP, and Black Gypsum DG offer many soil health benefits, as well as critical nutrients.